• Modbus DIO DIO-43

DIO-43

型號 : DIO-43
  • USB + RS-485 both interface control
  • Act as a Modbus Slave device receiving command from Modbus Master
  • Support 4 DI / 3 DO
  • Utility support for configuration

System

  • CPU : 8 bits CPU
  • RAM : 2 KB SDRAM
  • ROM : 32 KB Flash ROM

Serial Interface (to control DI/DO)

  • Port number :  1
  • Port Type :  RS-485
  • Connector : 2-pin Terminal Block
  • Speed :  9600 bps ~ 115.2 Kbps
  • Parity :   None , Odd , Even
  • Data Bit : 8
  • Stop Bit : 1, 2
  • Protection :  RS-485 Surge Protection

USB Interfaces (FTDI chipset)

  • Port number: 1
  • Port type: Com port

Software Features

  • Protocol : Modbus RTU
  • OS Supported : Win 10                          
  • Configuration :  Window Utility

Digital I/O

  • Digital Input    : 4 (active High / Low selectable)
  • Digital Output : 3 (active High / Low selectable)   
  • DO x 3 : Relay output, 125V AC@ 0.5A, 30V DC@ 1A
  • DI   x 4 : 3000 VDC Isolation Protect
  • Wet contact : Logic level 0 : 0~2 V, Logic level 1 : 5 ~ 20V
  • Dry contact : Logic level 0 : close to GND, Logic level 1 : open

Environment 

  • Temperature :  Operating: -10°C ~ 70°C, Storage: -15°C ~ 75°C
  • Humidity :        Operating: 10% ~ 95% non-condensing, Storage: 5% ~ 95% non-condensing

Power 

  • DC 5 ~24V, 100mA@ 12VDC
  • USB bus Power: 5V@ 300mA

Warranty

  • Warranty period : 1 year.
datasheet Type Size
 DIO-43-Modbus_RTU_DataSheet_202004a pdf 0.16.MB
product-image Type Size
 DIO-43-Modbus_top jpg 1.35.MB
user-manual Type Size